manualshive.com logo in svg

PerkinElmer Lambda 650, Руководство по оборудованию

Поделиться
Скачать
PerkinElmer Lambda 650 Скачать руководство пользователя страница 57

Lambda 650/850/950 Hardware Guide . 57 

 

 

 

Daily Checks 

The instrument is constructed with high quality components and requires little maintenance 

other than to keep it clean and free of dust. 

To protect the optical system from dust and fumes, you should keep the sample 

compartment cover closed except for when you are carrying out work in the compartment.  

The sample compartment windows should always be installed. 

You should observe the following care routine to maintain your instrument in good condition: 

•

 

Immediately clean all spilled materials from the affected area and wipe it dry with lint 
free paper or cloth. 
If you have to wipe the sample compartment windows, make sure you do not introduce 

scratches. The windows are optical components and you should handle them in the 

sampe way as high quality cells. 

•

 

Do not leave samples, particularly those given to fuming or evaporation, in the sample 
compartment for longer than necessary. 

•

 

If any type of sample handling system is installed and portions of it are left in the 
sample compartment (such as a sipper and flowcell), make certain that the system is 
cleaned at the end of the working day. 
Generally, such systems should be filled with deionized water when left overnight. 
 

 

CAUTION 

Spills 

Take care not to spill liquids onto the spectrometer. 

Expensive damage can result to the optics or electronics if liquids are 

spilled and run inside the instrument. 

Cleaning the Instrument Covers 

You can clean the outside of the instrument using a damp cloth.  Mild detergent may be 

used, if necessary.  Always perform a patch test on an inconspicuous area of the instrument, 

before you clean the entire instrument. 

Cleaning the Sample Compartment 

You must clean the sample compartment every time anything is spilled into it. This preserves 

the matt black finish, and prevents corrosion and contamination. 

The standard sample compartment baseplates have drain holes, as shown in  
Figure 17, in them to run off spilled liquids to the benchtop underneath the instrument. If 

required, place a sheet of thick filter paper under the instrument. 

Содержание Lambda 650









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды