manualshive.com logo in svg

PerkinElmer Lambda 650, Руководство по оборудованию

Поделиться
Скачать
PerkinElmer Lambda 650 Скачать руководство пользователя страница 52

52 . Using the Instrument 

 

Instrument Purging (Lambda 850 and 950 only) 

 

WARNING 

Always purge the instrument with an inert gas such as Nitrogen.  Never 

use a flammable gas such as Hydrogen.  

Oxygen absorbs radiation in the UV range below 190 nm, while water vapor absorbs 

radiation in the NIR range between 1350 nm and 1450 nm, 1850 nm and 1950 nm, and also 
between 2520 nm and 3000 nm. Best accuracy for measurements in these spectral regions 

can only be obtained when the spectrometer is purged with nitrogen. 

The entire optical compartment of the spectrometer is sealed. Radiation from the source 

lamps enters the optical compartments through a window. The sample compartment is also 

sealed from the optical compartment by windows. Thus the entire optical radiation path from 

virtually the source lamp to the detector can be purged largely free of water vapor and 
oxygen. 

Fittings are provided on the left side of the spectrometer for connection of a supply of 

nitrogen, as shown in Figure 16. The inlet nearest the rear of the instrument is for the 

sample compartment and the one nearest the front of the instrument is for the main optical 

compartment. After purging these compartments the nitrogen escapes to atmosphere. 

 

 

Figure 16 Connectors for the purge gas supply 

You should keep the sample compartment closed during routine operation to prevent the 

ingress of water vapor and oxygen. Do not leave the sample compartment cover open for 

longer than is necessary to perform operations within the sample compartment. After closing 

the sample compartment purge for several minutes before starting the measurement. 

When the spectrometer has been standing for some time unpurged, an initial flow of 20 
L/min is recommended. After the spectrometer has been thoroughly purged, the flow can be 

reduced to between 6 L/min to 7 L/min. 

When you have a good deal of work in a spectral region where water vapor or oxygen 

absorb the radiation, we recommend that you purge the spectrometer more or less 

continuously. This has the advantage that startup times are markedly shorter. This 
advantage is somewhat offset by the increased consumption of nitrogen. 

Purge inlets 

Содержание Lambda 650









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды