Peri RCS P Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 172

Peri RCS P Скачать руководство пользователя страница 6

6

RCS P Climbing Protection Panel

Instructions for Assembly and Use – Standard Configuration

Introduction

Product Description

The lower Climbing Rail RCS is an-
chored in the floor slabs of the struc-
ture by means of Climbing Shoes and
Slab Shoes. The top Climbing Rail is
offset and supports the enclosure
which is projecting upwards.

Intended use

Use in building construction projects

Provides anti-fall protection for site
personnel

Protection against falling objects

Protection against the effects of the
weather

PERI products have been designed for
exclusive use in the industrial and com-
mercial sectors by qualified personnel
only.

Features

The RCS Climbing Protection Panel is a
standard application of the RCS Rail
Climbing System.
The Climbing Protection Panel RCS P is
a bracket-type framework construction
and has been designed as protection
scaffold according to DIN 4420. Wind
load assumptions are accepted in ac-
cordance with DIN 1055.

The Climbing Protection Panel basically
consists of 2 bracket structures which
are connected to each other by means
of working platforms and the enclo-
sure.

Two Climbing Rails RCS connected
with walers and struts form the bracket
structure. The platforms are realised
using planking and platform beams.
The enclosure is attached to the Climb-
ing Rails and consists of timbers and
cladding comprising wooden multi-lay-
er panels or trapezoidal metal sheets.
Alternatively, other components can be
used for the enclosure providing static
proof has been obtained.

Standard configuration

These Instructions for Assembly and
Use describe the standard assembly of
the Rail Climbing System LPS as a
Climbing Protection Panel.

Version 1:

Minimum width with a narrow working
platform for 1 storey in advance.

Version 2:

Several wide working platforms for 1
storey in advance.

Version 3:

Several wide working platforms for 2
storeys in advance.

Version 4:

Without working platforms, with
straight protection screen.

Instructions on Use

Use in a way not intended according to
the Instructions for Assembly and Use,
or any use deviating from the standard
configuration or the intended use, rep-
resents a misapplication with a poten-
tial safety risk, e.g. risk of falling.

Only PERI original parts may be used.
The use of other products and spare
parts is not allowed.

Changes to PERI components are not
permitted.

The system described in these Instruc-
tions for Assembly and Use may con-
tain patent-protected components.

«
...
4
5
6
7
8
...
»

Содержание RCS P













































































































































































Отзывы:

Нет отзывов