Peri RCS P Скачать руководство пользователя страница 122

Страница: 122 / 172

44.5

44.4

44.1

122

D2 Operating the Climbing Shoe

Activating and Deactivating
the Climbing Pawl

Warning

This can cause serious injuries.

⇒

Only activate or deactivate the
climbing pawl when the Climbing
Unit has stopped moving.

⇒

Do not reach into the Climbing Rail
during the climbing procedure!

Deactivating the climbing pawl

Components

Climbing Shoe RCS

44.1

Climbing Pawl

44.4

Pawl Lock

44.5

Hinged Bail

1. Ensure that the Climbing Unit is sta-

tionary.

2. Pull down the pawl lock (44.4) on

the Climbing Shoe.

3. Fold up the hinged bail (44.5) on the

pawl lock (5.4) and then let go of the
pawl lock.

The hinged bail is then clamped and
blocks the climbing pawl.

The climbing pawl is deactivated and
therefore non-operational.

(Fig. D2.07 + D2.07a)

In this position, no vertical forces from
the Climbing Rail can be transferred via
this particular shoe.

Fig. D2.07

Fig. D2.07a

RCS P Climbing Protection Panel

Instructions for Assembly and Use – Standard Configuration

Содержание RCS P













































































































































































Результаты поиска

Содержание RCS P

Отзывы:

Peri RCS P, Инструкция по сборке и эксплуатации, Страница: 122 / 172

Результаты поиска

Содержание RCS P

Отзывы: