Peri RCS P, Инструкция по сборке и эксплуатации, Страница: 104 / 172

47.2
150
54
150
47.2
150a
150b
150a
150b
47.5
104
D1 Suspension and Anchoring
Fig. D1.04
Fig. D1.04a
Fixing the Slab Anchor in the
Reinforcement
In order to prevent the Climbing Anchor
from moving, PERI recommends fixing
the anchor to the top reinforcement of
the slab.
Components
47.2 Threaded Anchor Plate DW 20
47.5 Climbing Cone-2 M24/DW 15
54 Slab Anchor Template 61 RCS
150 Reinforcement
Assembly
1. Create an opening in the reinforce-
ment for the Threaded Anchor Plate
(47.2). If necessary, move colliding
reinforcement bars. For mesh rein-
forcement, cut rod and replace it
with reinforcement bars of the same
diameter.
2. Insert two pairs of reinforcement
bars crosswise in the top (150a) and
bottom (150b) positions of the top
reinforcement.
3. Fold down Slab Anchor Template
(54) and install Climbing Cone (47.5).
Align Slab Anchor Template and se-
cure.
4. Push the 4 reinforcement bars (150a
+ 150b) all the way up to the Climb-
ing Cone (47.5) so that they touch it
on each side. Wire reinforcement
bars to the slab reinforcement.
(Fig. D1.04 + D1.04a)
RCS P Climbing Protection Panel
Instructions for Assembly and Use – Standard Configuration