Peri RCS P, Инструкция по сборке и эксплуатации, Страница: 107 / 172

47 53 45
45
53
d
x
b
a
107
D1 Suspension and Anchoring
Assembly of the Slab Shoe RCS
1. Place Slab Shoe (45) on the slab at
an angle.
2. Fix to the anchoring (47) using bolts
M24 x 70 (53).
3. Turn Slab Shoe into the correct po-
sition and lower it.
4. Tighten bolt M24x70 (53).
5. Secure the front slotted hole (47.6)
to the floor slab using Anchor Bolts
(151). Alternatively, secure with
suitable heavy-duty dowels or on
embedded bolts and long nuts.
(Fig. D1.06 + D1.06a)
According to plan, there is a gap be-
tween the slab edge and the stop plate
of the Slab Shoe:
a = 600 mm,
b = 100 mm,
dx = 10 mm play
Have all fixings been correctly
tightened? Fig. D1.06
Fig. D1.06a
RCS P Climbing Protection Panel
Instructions for Assembly and Use – Standard Configuration