Peri RCS P, Инструкция по сборке и эксплуатации, Страница: 5 / 172

5
RCS P Climbing Protection Panel
Instructions for Assembly and Use – Standard Configuration
Introduction
Target Groups
Additional Technical Documentation
* Valid in Germany: Regulations for Occupational
Health and Safety on Construction Sites 30
(RAB 30)
** Instructions are given by the contractor him-
self or a competent person selected by him.
ƒ
Instructions for Use:
– RCS Climbing Device and Hydraulics
– Rail Climbing System RCS ClimbingScaffold with Carriage
– Lifting Beam RCS 9 t
ƒ
Product approvals:
– Z-21.6-1766 PERI Screw-On Cone
– Z-21.6-1767 PERI Climbing Cone
ƒ
Separate design information
ƒ
Design Tables 2015 – Formwork and Shoring
Contractors
These Instructions for Assembly and
Use are designed for contractors who
either
ƒ
assemble, modify and dismantle the
formwork system, or
ƒ
use them for, e.g. concreting, or
ƒ
allow them to be used for other op-
erations, e.g. carpentry or electrical
work.
Competent person
(Construction Site Coordinator)
The Safety and Health Protection Coor-
dinator*
ƒ
is appointed by the client,
ƒ
must identify potential hazards dur-
ing the planning phase,
ƒ
determines measures that provide
protection against risks,
ƒ
creates a safety and health plan,
ƒ
coordinates the protective measures
for the contractor and site personnel
so that they do not endanger each
other,
ƒ
monitors compliance with the pro-
tective measures.
Competent person qualified to car-
ry out inspections
Due to the specialist knowledge gained
from professional training, work experi-
ence and recent professional activity,
the competent person qualified to car-
ry out inspections has a reliable under-
standing of safety-related issues and
can correctly carry out inspections. De-
pending on the complexity of the in-
spection to be undertaken, e.g. scope
of testing, type of testing or the use of
certain measuring devices, a range of
specialist knowledge is necessary.
Qualified personnel
Formwork systems may only be as-
sembled, modified or dismantled by
personnel who are suitably qualified to
do so. For the work to be carried out,
the qualified personnel must have re-
ceived instruction** covering at least
the following points:
ƒ
Explanation of the plan for the as-
sembly, modification or dismantling
of the formwork in an understanda-
ble form and language.
ƒ
Description of the measures for as-
sembling, modifying or dismantling
the formwork.
ƒ
Naming of the preventive measures
to be taken to avoid the risk of per-
sons and objects falling.
ƒ
Designation of the safety precau-
tions in the event of changing weath-
er conditions which could adversely
affect the safety of the formwork
system as well as the persons con-
cerned.
ƒ
Details regarding permissible loads.
ƒ
Description of all other risks and dan-
gers associated with assembly, mod-
ification or dismantling operations.
ƒ
In other countries, ensure that
the relevant national guidelines
and regulations in the respective
current version are complied
with!
ƒ
If no country-specific regulations
are available, it is recommended
to proceed according to German
guidelines and regulations.
ƒ
A competent person must be
present on site during formwork
operations.