Peri RCS P Скачать руководство пользователя страница 124 | Manualshive

Страница: 124 / 172

Peri RCS P Скачать руководство пользователя страница 124

124

D3 Moving by Crane

Safety Instructions

Warning

There is a risk of falling from unse-
cured slab edges.

As a result of the moving procedure,
leading edges are formed between
the platforms.

A fall can result in serious injury or
even death!

⇒

Mount guardrails before climbing.

⇒

Areas of risk are to be cordoned off.

⇒

Use personal protective equipment
to prevent falls.

Warning

Parts of the body can get caught be-
tween the Climbing Rail and Slab Shoe
and become trapped. This can cause
serious injuries.

⇒

Do not take hold of anything be-
tween the Rail Guidance Shoes and
Climbing Rails while the climbing
enclosure is moving.

The load-bearing capacity of the
structural elements, which carry the
load-carrying Slab Shoes, must be
ensured!

Do not transport persons, building
materials or tools when moving with
the crane. These could fall off and
cause serious injury or even death.

Material or other components must
not protrude beyond the slab edge
This could hinder climbing or fall off.

In the event of a malfunction, the
climbing unit is to be set down in
the next possible position and an
authorised person is to be informed
immediately!

When climbing by crane, always
provide safe access for attaching
and detaching the crane lifting gear.
Additional double crane slings that
remain on the climbing enclosure
may be necessary until they can be
safely removed.

RCS P Climbing Protection Panel

Instructions for Assembly and Use – Standard Configuration

«
...
122
123
124
125
126
...
»

Содержание RCS P













































































































































































Отзывы:

Нет отзывов