Peri RCS P Скачать руководство пользователя страница 137

Страница: 137 / 172

60.6

60.1

44b

137

D4 Moving with the Climbing Device

Fig. D4.10

Fig. D4.10a

Step 9

1. Completely retract all hydraulic cylin-

ders until:

– Load is carried by the climbing

pawl in the middle Slab Shoe
(44b),

– Claw (60.1) is released from the

Spacer (3).

2. Detach hydraulic hoses from the

Climbing Device using the quick cou-
plers.

3. Close the Foldable Covers (41).
4. Tilt the Climbing Device backwards,

operate the locking lever (60.6) on
the cylinder base and lift out the
Climbing Device. (Fig. D4.10 +
D4.10a)

5. Transport the Hydraulic Pump,

Climbing Device and hydraulic hoses
to the next climbing enclosure.

In order to prevent the locking lever im-
mediately engaging again after releas-
ing, press the Climbing Device slightly
to the side.

When the hydraulic cylinders are

not being used, always completely re-
tract the pistons.

Finishing tasks

1. Fold down the Foldable Covers and

close any remaining gaps.

2. Supplement guardrails.
3. Dismantle trailing Slab Shoe, see

Section "Dismantling the Suspen-
sion" on page 115.

4. Remove anchoring that is no longer

needed, see Section "Dismantling
the Anchoring" on page 117.

RCS P Climbing Protection Panel

Instructions for Assembly and Use – Standard Configuration

Содержание RCS P













































































































































































Результаты поиска

Содержание RCS P

Отзывы:

Peri RCS P, Инструкция по сборке и эксплуатации, Страница: 137 / 172

Результаты поиска

Содержание RCS P

Отзывы: