Peri RCS P Скачать руководство пользователя страница 128 | Manualshive

Страница: 128 / 172

Peri RCS P Скачать руководство пользователя страница 128

128

Safety Instructions

Warning

There is a risk of falling from unse-
cured slab edges.

As a result of the moving procedure,
leading edges are formed between
the platforms.

A fall can result in serious injury or
even death!

⇒

Mount guardrails before climbing.

⇒

Areas of risk are to be cordoned off.

⇒

Use personal protective equipment
to prevent falls.

⇒

Keep Foldable Covers closed after
assembling the climbing hydraulics.

Warning

Parts of the body can get caught be-
tween the Climbing Rail and Slab Shoe
and become trapped. This can cause
serious injuries.

⇒

Do not take hold of the Climbing
Shoes and Climbing Rails while the
climbing enclosure is being moved.

Significant differences between
Versions 1 - 3 and 4

With Version 1 - 3, the Climbing Rail is
pulled into the top Slab Shoe during the
climbing procedure.

With Version 4, the Slab Shoe must be
swivelled into the projecting Climbing
Rail before climbing begins, then an-
chored and closed.

The load-bearing capacity of the
structural elements, which carry the
load-carrying Slab Shoes, must be
ensured!

Do not transport persons, building
materials or tools when moving with
the crane. These could fall off, lead-
ing to serious injury or even death.

Materials or other components must
not protrude beyond the slab edge
This could hinder climbing or fall off.

If manual intervention is necessary
during the climbing procedure, the
platform to be climbed may only be
accessed after consultation with the
operating personnel.

In the event of a malfunction, the
climbing enclosure is to be set down
in the next possible position and an
authorised person is to be informed
immediately!

Install hydraulic hoses so that

– no loops or knots are created,

– no loops form beyond the edge of

the slab,

– they do not get tangled with the

climbing platforms.

Up to 2 units can be climbed at the
same time.

D4 Moving with the Climbing Device

RCS P Climbing Protection Panel

Instructions for Assembly and Use – Standard Configuration

«
...
126
127
128
129
130
...
»

Содержание RCS P













































































































































































Отзывы:

Нет отзывов