manualshive.com logo in svg

Peri RCS P, Инструкция по сборке и эксплуатации, Страница: 139 / 172

Поделиться
Скачать
Peri RCS P Скачать руководство пользователя страница 139

44c

44b

139

Removing the Climbing 
 Enclosure

  Warning

Hands can get caught between the 
Climbing Rail and Slab Shoe and be-
come trapped. This can cause serious 
injuries.

⇒

⇒

Do not take hold of anything be-
tween the Rail Guidance Shoes and 
Climbing Rails while the climbing 
 enclosure is moving.

⇒

⇒

Do not open the foldable skids if the 
Climbing Rail is pressing against 
them.

1. Personnel must leave the platforms 

of the climbing enclosure.

2. Open guiding skids of the bottom 

Climbing Shoe (44c).

3. Lift climbing enclosure slightly with 

the crane in order to relieve the mid-
dle Slab Shoes (44b).

4. Open the guiding skids on the mid-

dle Slab Shoes (44b).

5. Move climbing enclosure away from 

the building with the crane and trans-
port to a suitable dismantling area.

6. Dismantle the remaining Slab Shoes 

(44b, 44c) and remove the anchoring.

7. Complete guardrails.
(Fig. E.02)

E 

Dismantling

Fig. E.02

RCS P Climbing Protection Panel

Instructions for Assembly and Use – Standard Configuration

Содержание RCS P













































































































































































Отзывы:

Нет отзывов