Peri RCS P, Инструкция по сборке и эксплуатации, Страница: 102 / 172

54.3 54.4 1 54.2 54.1
54 53
47
1
61 L
102
D1 Suspension and Anchoring
Mounting the Leading Anchor
With the Slab Anchor Template RCS 61
(54), the Leading Anchor (47) is fixed in
position during concreting.
Variable length L = 61 to 102 cm.
Components
1 Enclosure Post
47 Anchoring
53 Bolt ISO 4014 M24 x 70-10.9
54 Slab Anchor Template 61 RCS
Assembly
1. Loosen bolt connections of the
clamping plates (54.4).
2. Insert Slab Anchor Template in the
Enclosure Post.
3. Turn the clamping plates behind the
profile of the Enclosure Post (1) and
slightly tighten the bolted connection.
Adjusting the length
1. Loosen wing screws (54.1).
2. Move telescopic piece (54.2) until
the support plate (54.3) sits flush on
the stopend formwork.
3. Place support plate on stopend form-
work and fix using nails.
Adjusting the height
1. Slightly loosen the bolted connections
of the clamping plates (54.4).
2. Push the Slab Anchor Template on
the Enclosure Post until it is in a hori-
zontal position.
3. Tighten the bolted connection.
(Tightening torque 120 Nm)
4. Tighten wing screws (54.1).
(Fig. D1.01 + D1.02)
Fig. D1.01
Fig. D1.02
The stop on the support plate creates
an impression in the concrete which is
suitable for the Slab Shoe.
RCS P Climbing Protection Panel
Instructions for Assembly and Use – Standard Configuration