Peg-Perego Si CLASSICO, Инструкция по эксплуатации

Страница: 15 / 52

- 15 -
already fitted on the car seat.
Position the backrest of the stroller into the 2nd
central position (section 12).
Position the car seat handlebar into transport
position so that the straps can be easily fastened.
18
•
Push the button beneath the armrest and extend
the front bar, then simultaneously pull it out from
both sides (fig. a).
WARNING: Only extend the front bar when
attaching the Car Seat.
Lean and fit-in the car seat into the seat of the
stroller (fig. b).
19
•
First lock the strap buttonhole into the button of
the stroller (arrow 1), then pass through the strap
behind the handlebar of the car seat (arrow 2).
Lock the strap buttonhole into the button on the
lower part of the stroller frame (arrow 3) and then
tighten the strap until the car seat is completely
fastened into the stroller (arrow 4).
Follow the same procedures on the other side of
the stroller (fig. c).
Car seat locked correctly into the stroller (fig. d).
Releasing the car seat from the stroller:
loosen the belts;
unlock the strap buttonhole from the lower part
of the stroller frame; slip it off from behind the
handlebar of the car seat; then, unlock the strap
buttonhole from the stroller button.
SERIAL NUMBERS
20
•
The Stroller Si has all the following relevant
information behind the backrest: product name,
date of manufacture and serial number.
This information is required for any complaints.
ACCESSORIES
21• MOSQUITO NETTING: can be fastened to the hood (fig_a).
BAG: diaper-changing bag with pad for changing baby’s
diaper. Attaches to the stroller (fig_b).
22• TRAVEL BAG: practical duffle bag for transporting the
stroller by plane (fig_a).
UMBRELLA: practical umbrella to match (fig_b).
CLEANING AND MAINTENANCE
PRODUCT MAINTENANCE: protect from the weather:
water, rain, or snow; prolonged and continuous
exposure to bright sunlight may give rise to colour
changes of various different materials; store this
product in a dry place.
CLEANING THE CHASSIS: periodically clean all plastic
parts with a damp cloth. Do not use solvent or
similar cleaning products; keep all metal parts dry to
prevent rusting; keep moving parts clean (adjustment
mechanisms, locking mechanisms, wheels, ...) and free
of dust and sand and, if necessary, lubricate with light
machine oil.
CLEANING THE RAIN CANOPY: wash with a sponge and
soapy water; do not use detergents.
CLEANING FABRIC PARTS: brush fabric parts to remove
dust and wash by hand at a maximum temperature of
30°C; do not wring; do not use chlorine bleach, do not
iron; do not dry clean; do not apply solvent-based stain
removers and do not dry in a tumble dryer.
PEG-PÉREGO S.p.A.
Peg-Pérego S.p.A. is an ISO 9001
certified company. This certification is
a guarantee for customers and
consumers of the transparency and
trustworthiness of the company's
procedures and working methods. Peg
Pérego can make changes at any time to the models
described in this publication for technical or
commercial reasons. Peg Pérego is at the disposal of its
customers and consumers to ensure that all their
demands and queries are fully satisfied. It is a key part
of our policy to ensure we are always aware of our
customers' views and requirements. We would
therefore be very grateful if, after using a Peg Pérego
product, you take the time to fill in our CUSTOMER
SATISFACTION QUESTIONNAIRE, making a note of any
comments or suggestions you might have. You can
find the questionnaire on the Peg Pérego website:
www.pegperego.com
PEG-PÉREGO AFTER-SALES SERVICE
If any parts of the item get lost or damaged, only
use genuine Peg Pérego spare parts. For any repairs,
replacements, information on the products and sales
of genuine spare parts and accessories, contact the
Peg Pérego Assistance Service and state the serial
number of the product, if present.
tel.
0039/039/60.88.213
fax 0039/039/33.09.992
e-mail assistenza@pegperego.it
website
www.pegperego.com