19
Installation Manual
Installing the Battery Enclosure & More
Assembly
1. INSTALLING THE BATTERY ENCLOSURE, BATTERY & WIRES
Before installing the battery enclosures, make sure nothing inside the
package is damaged. You should have received the following items in the
package: The EverVolt, backplate, brackets, screws and this installation
manual.
The following considerations must be taken into account before selecting
where to install.
• The unit cannot be mounted on flammable construction materials.
• The unit must be mounted to a solid surface.
• ALLOW 20CM (8IN) OF CLEARANCE TO THE SIDES AND 50CM (20IN)
TO THE TOP of the unit for proper air circulation to dissipate heat.
• The ambient temperature (charging) must be between 5°C and 50°C
and discharging -10°C and 50°C; relative humidity must be between
5 and 85% to ensure optimal operation. Do not operate where the
temperature and humidity are beyond the specified limits.
• The unit has a Pollution Degree rating of PD2. The unit must be
mounted in a protected area that is dry, free of excessive dust and
has adequate air flow.
• The unit was designed with an IP20 protection rating and is for indoor
applications only.
To begin installing the battery enclosures, please follow the steps below:
1. Take the enclosure out of the box and move to a stable surface.
Содержание EverVolt EVAC-105-6
Страница 1: ...V 01012021 Installation Service Manual FOR AC AND DC COUPLED EVERVOLT SYSTEMS ...
Страница 65: ...65 Installation Manual Operation and Display Panel ...
Страница 76: ...76 Installation Manual Configuring the Hardware PV INPUT IS ONLY USED FOR EVERVOLT DC COUPLED SYSTEM ...
Страница 83: ...83 Installation Manual Step 5 Install the Generator wire ...