Panasonic EverVolt EVAC-105-6, Инструкция по установке и обслуживанию

Страница: 11 / 99

11 Installation Manual
WARNING: Users should not attempt to service the EverVolt.
Only an authorized technician should attempt to service the
EverVolt.
WARNING: Risk of injury and equipment damage. Protect the
EverVolt from damage and improper use.
WARNING - ARC FLASH AND SHOCK HAZARD: Appropriate
PPE and Tools Required (protective eyewear and gloves) while
working on the energized equipment. Voltages up to 400 VDC
and 240 VAC Present. Arc Flash Approach Boundary 1.0 m.
Arch Flash Prohibited Approach Boundary 24 mm.
Important Safety Warnings
MULTIPLE WARNINGS: Method of active anti-islanding
protection: The inverter monitors for sudden changes in the
impedance of the grid by looking for changes in the second to
the eighth harmonic.
Perform installation and wiring in accordance with all
applicable local electrical codes and standards.
Protection against lightning and resulting voltage surge must
be in accordance with local standards.
Using unapproved attachments or accessories could result in
damage or injury.
Use Class 1 wiring methods for field wiring connections to
terminals of a Class 2 circuit. Use only 6-8 AWG (2.5mm
2
to 4mm
2
) and 1/0 wire in the junction box terminal block.
Select the wire size based on the protection provided by the
circuit breakers / fuses. Install properly rated over current
protection as part of the system installation.
To ensure optimal reliability and to meet warranty
requirements, the Inverter must be installed and/or stored
according to the instructions in this guide.
In the event that Inverter, one or more batteries or EverVolt is defective
and needs to be removed, replaced, temporarily uninstalled, disposed
of, decommissioned or if Panasonic Customer Support authorizes a
replacement (RMA), perform the following steps:
1. Follow installation and service shut down.
2. Contact Panasonic Customer Support at
panasonicevervoltsupport@us.panasonic.com or at 1-866-292-7299