– 88 –
Chapter 4 Shooting — Dual codec recording
Error displays about proxy data recordings
If an error occurs during recording the proxy data, check the entries in the following table and take necessary actions.
Error displays
(Viewfinder)
Behavior and cause
Action to take
[PROXY ERROR] or [PROXY
REC WARNING]
Stops recording of proxy data. This may also stop recording of
materials.
f
An error occurred in the internal proxy module.
[PROXY ERROR]
f
A proxy data recording error occurred.
[PROXY REC WARNING]
f
If a proxy data recording error occurs, the proxy data currently
being recorded will be processed as below:
- The proxy data being recorded to the P2 card will be
deleted.
- The proxy data being recorded to the SD memory card will
not be restored.
The proxy data will not be properly recorded. Turn off the
camera and turn on it again to check the recording and
playback. If the error continues to occur, please consult your
dealer.
[SD 0 min]
Recording of the materials and proxy data will continue.
f
The remaining SD memory card capacity is getting low.
(approximately shorter than one minute)
After finishing recording, insert a new SD memory card.
[SD END]
Proxy data recording to the SD memory card will stop, but
recording to the P2 card will continue.
f
No SD memory card capacity remains.
After finishing recording, insert a new SD memory card.
f
The proxy data being recorded to the SD memory card will
be deleted.
To restore the deleted proxy data, select clips in the P2 card
and copy them to the SD memory card. (page 88)
[SD WR ERR]
Proxy data recording to the SD memory card will stop, but
recording to the P2 card will continue.
This is displayed when proxy data cannot be recorded in the
SD memory card even when the main menu
→
[RECORDING
SETUP]
→
[DUAL CODEC SETTING]
→
[CODEC USAGE] is
set to [PROXY REC(P2&SD)].
r
If the error message is displayed when recording
starts:
f
The SD memory card format is different.
f
The SD memory card contains 1000 clips or more.
r
If the error message is displayed during
recording:
f
The SD memory card was ejected during recording.
f
An error occurred in recording to the SD memory card.
Check the status of the SD memory card and insert a
[SD --min] or [SD WP]
Proxy data will not be recorded to the SD memory card, but
recording to the P2 card will be performed.
f
No SD memory card is inserted. [SD --min]
f
The SD memory card is write-protected. [SD WP]
Check the status of the SD memory card.
Copying proxy data to the SD memory card
1
Press the <THUMBNAIL> button to display the thumbnail screen.
2
Use the cursor buttons to move the cursor to the clip to be copied, and press the <SET> button.
3
Select [SD CARD] in the main menu
→
[CLIP]
→
[COPY].
4
Select [YES] in the confirmation message and press the <SET> button.
@
@
NOTE
t
If [SD END] is displayed and the proxy data being recorded to the SD memory card is deleted, perform this procedure to copy the proxy data from the
P2 card, and enable the deleted proxy data to be restored.
t
Source data is not copied.
Содержание AJ-PX380G
