Panasonic AJ-PX380G, Руководство по эксплуатации

Страница: 216 / 229

– 216 –
Chapter 11 Maintenance — Warning system
During thumbnail and menu operation
Display Description Behavior and cause
[AUTHENTICATION ERROR!] Manual authentication failed. Enter the correct password.
[CANNOT ACCESS!]
Data cannot be accessed due to a content defect or
some other reason.
Ensure the health of the media and the clips.
[CANNOT CHANGE!]
For a clip with the mark, where a thumbnail cannot
be generated, the thumbnail cannot be modified in the
text memo position.
Correct the settings and content to enable display of the
thumbnail.
[CANNOT DELETE!] The content versions do not match. Cannot delete. Match the device and contents version.
[CANNOT FORMAT!]
A P2 card problem or some other reason prevents
formatting.
Check the P2 card.
[CANNOT RE-CONNECT!]
Clips cannot be remerged because either clips not
recorded across multiple P2 cards are selected or other
reasons.
Check the selected content.
[CANNOT REPAIR IN SELECTION!] Some of the selected clips cannot be repaired. Check the selected content.
[CANNOT REPAIR!] Content that cannot be repaired is selected. Check the selected content.
[CANNOT SAVE!][FILE NAME IN USE]
A settings file of the same name exists on the SD
memory card.
Use another name to save the file.
[CARD FULL!] The P2 card or SD memory card is full. Insert a card with free space available.
[COPY IMPOSSIBLE. TOO LARGE CLIP
CONTAINED!] [CLIP NAME:] (clip name)
Files exceeding 4 GB cannot be copied to P2 memory
cards or microP2 memory card with 32 GB or smaller
capacity.
Copy to a microP2 memory card with 32 GB or larger
capacity.
[INVALID VALUE!] The data value you entered is invalid. Enter data within the normal range.
[INVALID DELETE]
The clip recorded last cannot be deleted with the last
clip delete function.
To close the dialog, press the [SET] button.
For details on conditions that clip cannot be deleted,
refer to “Final clip delete function” (page 108).
[LACK OF CAPACITY!] There is not enough recording capacity left on the card. Insert a card with sufficient recording capacity.
[MISSING CLIP!]
Shot marks cannot be attached to the clips unless all
clips recorded over multiple P2 cards are present.
Insert all P2 cards over which recording extended.
[NO CARD!] No P2 or SD memory card is inserted. Insert the relevant media.
[NO COPY TO SAME CARD!]
A clip cannot be copied to the card storing the original
clip.
Copy the selected clip to a card that does not contain
the original clip.
[NO FILE!] The specified file does not exist. Check the file.
[NO INPUT!] No data is entered. Enter data and then set.
[NO SD CARD!] No SD memory card. Insert an SD memory card.
[NOT SELECTED!] Attempted to delete without selecting clips. Select clips to delete.
[SAME CLIP IS SELECTED!]
Multiple instances of the same clip (copies) are included
in the clips selected.
Multiple instances of the same clip (copies) cannot be
copied simultaneously. Remove instances of the same
clip from selected items.
[TOO MANY CLIPS!] Too many clips are selected. Reduce the number of selected clips.
[UNKNOWN CONTENTS FORMAT!]
This is a warning of the contents for the version that is
not supported by the camera.
Match the device and content versions.
You cannot write back only proxy recording clips from
the FTP server to the P2 card.
Write back (import) proxy recording clips to an SD
memory card.
[UNKNOWN DATA!]
The metadata character code is invalid.
The metadata character code is UTF-8. Enter valid
characters using a viewer.
There is a problem with data in the file. Create the file again.
[USER CLIP NAME MODIFIED!]
When adding a counter value to the clip name,
characters must be deleted.
For the counter addition setting, the user clip name plus
the counter value can only contain up to 100 bytes.
Characters in the clip name are automatically deleted
when the total number of characters exceeds this limit.
[WRITE PROTECTED!] The P2 card or SD memory card is write-protected. Insert write-accessible media.
[CANNOT OPERATE THIS MENU, WHILE
"REC DURING UPLOAD" ENABLED.]
The menu cannot be executed.
Set [DISABLE] in the main menu → [NETWORK
SETUP] → [FTP CLIENT SERVICE] → [REC DURING
UPLOAD] before execution.
During soft keyboard operation
Display Description Behavior and cause
[AUTHENTICATION ERROR!] Manual authentication failed. Enter the correct password.
[CANNOT CHANGE!]
An attempt is made to enter the [PERSON] item (user
who enters the memo) when there is no text memo.
Enter the [TEXT] (text information) first.
[CANNOT SET!]
[INVALID VALUE!]
The entered value is invalid. Change the input value.
[CANNOT SET!]
[NO INPUT!]
There is not input to the software keyboard. Enter the password.
[CANNOT SET!]
[RETRY PASSWORD IS DIFFERENT!]
The re-entered password is different. Enter the correct reference password.