Panasonic AJ-PX380G, Руководство по эксплуатации

Страница: 123 / 229

– 123 –
Chapter 5 Playback — Thumbnail operations
5 Clip metadata
The items for referencing clip properties (clip metadata) are displayed.
For details, refer to “Setting clip metadata” (page 119).
Modifying recorded clip metadata
Fig. 1 Fig. 2
1
Display the metadata details window for the clip to be modified on the clip properties screen.
2
Use the cursor buttons to place the cursor on the item to be modified. (Fig. 1)
The items of the metadata with the gray buttons in background can be modified.
3
Press the <SET> button.
Information about keyboard operation is the same as “Checking and modifying uploaded metadata” (page 120).
f The input window (software keyboard) for modifying metadata is displayed. (Fig. 2)
f Enter characters with the keyboard to modify the metadata.
4
Select [OK] on the keyboard.
The modified metadata is written on the clip and the screen returns to the metadata details window.
@ @
NOTE
t To delete each item in [LOCATION] (shooting location data) of [SHOOT], the item cannot be deleted alone. By setting the [ALTITUDE] item to empty,
other [LONGITUDE] and [LATITUDE] items are collectively deleted.
t Metadata of clips with (incomplete clip indicator) cannot be repaired. Repair of metadata of clips recorded across multiple P2 cards must be
performed after inserting all of the P2 cards.
t Any [MEMO] with 101 characters or more cannot be modified.
Displaying P2 card status
r P2 card status display settings
You can select the P2 card status display from either remaining capacity or used capacity of the P2 card.
1
Press the <THUMBNAIL> button.
The thumbnail screen appears on the viewfinder.
2
Select [REMAIN] (remaining capacity) or [USED] (used capacity) in the main menu → [CLIP] → [PROPERTY] → [REMAIN SETUP].
(Fig. 1)
r P2 card status display items
Item Content of display
[REMAIN] Displays remaining capacity on the P2 card as the P2 card status display. (Factory setting)
[USED] Displays used memory capacity on the P2 card as the P2 card status display.
Contents of P2 card status display settings
Select [CARD STATUS] in the main menu → [CLIP] → [PROPERTY].