Panasonic AJ-PX380G Скачать руководство пользователя

Страница: 141 / 229

– 141 –

Chapter 6 Menu Operations — Menu list

Item

Description of settings

[REPOSITION]

Selects a clip to be displayed on the thumbnail screen.

[ALL CLIP]:

Displays all clips as thumbnails.

[SAME FORMAT CLIPS]:

Displays only the clips recorded in the same format as the system format as

thumbnails. Clips recorded in the same format means that each item of [LINE&FREQ], [REC FORMAT],

and [AUDIO SMPL RES] in the main menu

→

[SYSTEM MODE] matches the current setting status.

Example) [1080-59.94i], [AVC-I100], [24BIT]

[SELECTED CLIPS]:

Displays only the clips selected with the cursor buttons as thumbnails. The

thumbnails appear in the selected order.

[MARKED CLIPS]:

Displays only the clips with shot marks added as thumbnails.

[TEXT MEMO CLIPS]:

Displayed only clips with text memo data attached as thumbnails.

[SLOT CLIPS]:

Displays only the clips of the selected slot as thumbnails.

[NG CLIPS]:

Displays only the clips with the defective clip indicator in the thumbnail.

Factory setting: [ALL CLIP]

[DELETE]

Deletes selected clips.

[FORMAT]

When the [FORMAT] menu is selected, format the P2 card of the specified slot.

[SLOT 1], [SLOT 2], [SLOT 3], [SD CARD]

When a CPS password is set, you can select [NORMAL] (normal unencrypted format) or

[CPS(ENCRYPT)] (encrypted format).

Data deleted as a result of formatting cannot be restored. Always check the data before formatting.

[FORMAT(STORAGE)]

Formats a storage device connected to the <USB2.0> terminal (host) using the specified file system.

[TYPE S]:

Formats in the [TYPE S] format.

[FAT]:

Formats in the [FAT] format.

This item is enabled only while the storage explorer screen or storage thumbnail screen is displayed.

[COPY]

Copies the selected clip to a P2 card in any card slot or a storage device.

[SLOT 1], [SLOT 2], [SLOT 3], [SD CARD], [STORAGE], [FTP], [FTP(PROXY)]

[EXPORT]

Exports (writes) clips from the P2 card or SD memory card to a storage device or FTP by units of card.

[ALL SLOT], [SLOT 1], [SLOT 2], [SLOT 3]:

Exports clips from the P2 card to a storage device.

[SD CARD]:

Exports from the SD memory card to FTP.

[IMPORT]

Imports (writes back) clips, etc. from a storage device or FTP to the P2 card or SD memory card by units

of card.

[SLOT 1], [SLOT 2], [SLOT 3], [SD CARD], [STORAGE], [FTP]

[REPAIR]

Repairs a clip displayed in the defective clip indicator (yellow) occurring as a result of sudden power loss

during recording or other reasons.

[RE-CONNECT]

If clips that were recorded over multiple P2 cards are not recognized as consecutive clips and the

incomplete clip indicator is displayed, use this function to restore the clips to the consecutive clips (the

original combined clips).

[EXCH. THUMBNAIL]

Changes the clip thumbnail to an image with any text memo. This can be executed while the text memo

clip is displayed.

[EXPLORE]

When in USB host mode, switches to the information display screen for storage device and network

connection.

[STORAGE]:

Switches to the information display screen for storage device.

[FTP]:

Switches to the information display screen for FTP server.

[AUTHENTICATE]

When this menu is selected from the card status screen, a software keyboard is displayed to enter the

CPS password. If the password is entered and [OK] is selected, the CPS password is set to the camera.

When the set CPS password is successfully authenticated, the message [AUTHENTICATED

SUCCESSFULLY!] is displayed.

When the set CPS password authentication fails, a warning message is displayed.

[CHANGE PARTITION NAME]

When in USB host mode, sets/changes the partition name of the storage device.

The default value is the date and time when the partition was created.

This item is enabled only for the [TYPE S] storage device.

This item is displayed only when the storage explore screen is displayed.

[DELETE LAST PARTITION]

When in USB host mode, deletes the last storage partition.

The partition can be deleted only when the cursor is placed on the last partition.

This item is displayed only when the storage explore screen is displayed.

[DELETE FOLDER]

Delete folders in the storage device in the FAT format.

[PROPERTY]

[CLIP PROPERTY]

Detailed clip information is displayed on the screen. Items can be individually corrected.

[CARD STATUS]

Displays the card status of a card slot.

[CPS PASSWORD]

Sets the CPS encrypted password of the microP2 memory card.

[LOAD]:

Loads CPS password from an SD memory card.

[SET]:

Enters the CPS password.

[DELETE]:

Deletes the password saved to the device, and disables encrypted formats.

[SD CARD]

Displays SD memory card information.

[REMAIN SETUP]

Sets which is displayed, remaining capacity or used capacity, when P2 card information is displayed.

[REMAIN]:

Displays remaining capacity.

[USED]:

Displays used capacity.

Factory setting: [REMAIN]

[FREE CAP. OF

PARTITION]

Displays available space in a partition.

This is displayed while the thumbnail screen for the [TYPE S] storage device is displayed.

Содержание AJ-PX380G






































































































































































































































Результаты поиска

Содержание AJ-PX380G

Отзывы:

Похожие инструкции для AJ-PX380G

Бренды по названию

Популярные бренды

Panasonic AJ-PX380G, Руководство по эксплуатации

Результаты поиска

Содержание AJ-PX380G

Отзывы:

Похожие инструкции для AJ-PX380G

Бренды по названию

Популярные бренды