manualshive.com logo in svg

OTARI Status 18R, Руководство по эксплуатации и обслуживанию, Страница: 99 / 250

Поделиться
Скачать
OTARI Status 18R Скачать руководство пользователя страница 99

First create the EQ Out Preset:

1.

Press 

EQ Out 

in the Mix and Chan path areas of the Master Section.

2.

Press 

Set Transparent 

twice. Select the Mix and Chan EQ switches by

pressing 

EQ In 

or 

EQ Out 

in the Mix and Chan path areas of the Master

Section.
EQ Out

will be lit for each path; all other switches will be flashing.

3.

Hold 

Many 

and press 

Rec

.

The Master Section is now stored in the 

Rec 

Preset button.

To use the Rec Preset:

1.

Press 

Rec

.

In the Master Section 

EQ Out 

will be lit for each path, 

EQ In 

will not be lit, and all

other switches will be flashing.

2.

Press 

Copy To Module

, then press 

All

.

The EQ will be switched out of the Mix and Chan path of every module. All modules
will still be selected.

3.

Press 

Undo 

to return all EQs to their original states.

Pressing 

Undo

repeatedly will now toggle the EQs In and Out.

4.9.5 Loading and Saving Preset Banks

The 8 user-defined Presets definitions can be loaded from or saved to disk using the

PRSTS

option of the 

MISC

LCD Menu. Both Select Groups and Presets are saved to

the console master disk.

Section 4 - Operation

August 1999

4 - 17

STATUS 18R 

Operation and Maintenance Manual

Содержание Status 18R



























































































































































































































































Отзывы:

Нет отзывов