manualshive.com logo in svg

OTARI Status 18R, Руководство по эксплуатации и обслуживанию, Страница: 66 / 250

Поделиться
Скачать
OTARI Status 18R Скачать руководство пользователя страница 66

3.5.4 Studio/Effects

The Studio/Effects Section controls the output to the Studio Monitor speakers.

■

Studio Source Selectors

The Studio/Effects Source selector buttons consist of:
• AUX 7/8
• AUX 5/6
• AUX 3/4
• AUX 1/2
• TAPE 3
• TAPE 2
• TAPE 1
• MIX

These switches select the audio source that is fed to the Studio Monitor outputs. The
Studio Source buttons are independently selected; one or more may be selected
simultaneously. When more than one source is selected, the sources are summed
equally.

■

Level Control

When the 

Studio/Effects 

LED is lit, the Level Control adjusts the output level of the

Studio Section. Turning the Level Control Clockwise raises the output level.

The Talkback Mic feed is not affected by the Studio Level Control.

■

Studio/Effects

The 

Studio/Effects 

button toggles the output of the Studio Section On and Off. When

the 

Studio/Effects 

LED is lit, the Studio output is On.

The Talkback Mic feed is not affected by the 

Studio On 

button.

STATUS 18R

Operation and Maintenance Manual

Section 3 - Controls and Indicators

August 1999

3 - 28

Mix

Tape

1

Tape

2

Tape

3

Aux

1/2

Aux

3/4

Aux

5/6

Aux

7/8

Studio/

Effects

Studio/Effects Section

Содержание Status 18R



























































































































































































































































Отзывы:

Нет отзывов