OTARI Status 18R Скачать руководство пользователя страница 107 | Manualshive

Страница: 107 / 250

OTARI Status 18R Скачать руководство пользователя страница 107

■

To Enter Group Setup Mode

• Press GROUP on the LCD Menu System.
• Press SETUP under the GROUP label.

■

Indication

The path’s ON LEDs indicate if the path is a Group Master, Group Member, or not
assigned:
BLINK

indicates a master fader

ON

indicates a group member (of some group)

OFF

indicates the fader is not a master or member of any group.

To identify individual groups use the Display Groups function described next.

4.13.4 Group Setup Mode Functions

■

Group Edit

The Group Edit mode is used to:
• Create a new group
• Add or remove members from an existing group
• Change the master of an existing group
• Delete an existing group

■

To Enter Group Edit Mode:

1.

Make sure you are in Group Setup mode (Press the SETUP button in the GROUP
Menu).

2.

Press the ON button of any path to enter Group Edit mode.

3.

If that path is an existing group member or master, the user is now editing that
group.

4.

If that path is not part of any group, the user is now creating a new group. The
selected path becomes the master for the new group with the zero offset point at
the physical position of the master fader at the time when the Write button is hit.
If the master fader is also being used as an audio path (local fader) then its physical
position will already be set in relation to the rest of the group. It can be adjusted
later, if necessary.
If the master fader will only be used as a Group master (it will carry no audio), it is
recommended that the fader be set to “zero” on the fader scale before making it a
group master. This allows the panel markings to indicate the group offset level.

■

Indication

All path ON LEDs turn Off except for the group that is now being edited.

■

To Add a Member to the Group Being Edited:

1.

Press the ON button of a path whose LED is not lit.
If that path is not a member of another group, its LED will turn on indicating that it is
now a member of the group being edited.
If that path is a member of a different group, that other group will be displayed
while the ON button is depressed (extinguishing the current group). When the Write
button is released, group editing may be resumed. That path was not added to the
group being edited because it already belongs to another group.

2.

Exit from Group Edit mode by pressing the DONE button on the LCD display.

■

To Delete the Group Being Edited:

Press the ON button of the Group Master (LED is blinking).
The Blinking LED will turn OFF indicating that the Group Master has been deleted.
Alternately, you can press the DELETE KEY displayed on the Creating Group LCD Menu.
Exit from Group Edit mode by pressing the DONE button on the LCD display.

Section 4 - Operation

August 1999

4 - 25

STATUS 18R

Operation and Maintenance Manual

Meter

Solo

Group

Recall

Automation

Misc

GRP SETUP: PRESS PATH ON

VIEW MASTERS DELETE ALL

GROUP Setup LCD Menu

Meter

Solo

Group

Recall

Automation

Misc

-- CREATING GROUP --

DELETE DONE

CREATE GROUP LCD Menu

«
...
105
106
107
108
109
...
»

Содержание Status 18R



























































































































































































































































Отзывы:

Нет отзывов