manualshive.com logo in svg

OTARI Status 18R, Руководство по эксплуатации и обслуживанию, Страница: 179 / 250

Поделиться
Скачать
OTARI Status 18R Скачать руководство пользователя страница 179

5.9.9 Leave Update (Manual Faders)

Leave Update is a transition mode that provides a means of zeroing the offset being
applied to during Update then seamlessly leaving Update mode.
While in Leave Update, the path’s module Status LEDs sequence to indicate the
direction that the fader must be moved to match levels. When the match point is
reached, the fader automatically drops into Read mode.
If Auto Glide is On, entering Leave Update will cause the offset to start fading toward
zero. When the offset is zero, the fader automatically drops into Read mode.

• To execute Leave Update from Update: 

Press 

Update

. Pressing 

Auto 

while a path

is in Update will put the path into Leave Update, regardless of the 

Auto 

button style.

• Mode Indication: 

Write 

LED = Off, 

Update

LED = Flash

• To go Directly to Read from Leave Update: 

Press 

Update

.

5.9.10 Offset Write (Manual Faders)

Offset Write is a Write mode that allows seamless entry and exit between Update and
Write modes without having to match fader and data levels. When Offset Write is entered
from Update mode, the level being written matches the data level in effect at the time of
entry. This means that the level being written may be offset from the actual position of
the fader. When Update is returned to from Offset Write, the Write and Update levels are
matched for a seamless exit.

■

Write and Offset Write

Write and Offset Write are different modes. Write can only be entered from Read mode.
When in Write, the actual fader level is written to data.
Offset Write can only be entered from Update mode. When in Offset Write, the level
being written to data may be different from the physical fader level.

• To execute Offset Write from Read: 

Press the path’s 

Update 

button then press the

path’s 

Write 

button.

• To execute Offset Write from Update: 

Press the path’s 

Write 

button.

• Mode Indication: 

Write 

LED = On, 

Update 

LED = On

• To go to Leave Write mode: 

Press 

Write

.

• To go to Update mode: 

Press 

Update

.

■

Using Offset Write

Often it is not convenient to match fader and data levels when changing between
Update and Write modes. By entering Offset Write instead, a seamless transition is
made to a Write mode. After the section is written, pressing 

Update 

returns the path to

update with its levels matched. From here you can press 

Update 

to go to Leave Update

and return to Read mode.
You can leave Offset Write directly by pressing 

Write

. The path will go to Leave Write

from which you can return to Read.

STATUS 18R

Operation and Maintenance Manual

Section 5 - Eagle Automation

August 1999

5 - 57

Содержание Status 18R



























































































































































































































































Отзывы:

Нет отзывов