OTARI Status 18R Скачать руководство пользователя страница 52

Страница: 52 / 250

3.2.9 Selection Buttons

The Selection buttons include:

• Group A
• Group B
• Group C
• All
• One
• Many
• Last
• Shift
• None Selected LED

The Input Module

Select

buttons work in conjunction with the Master Section Selection

buttons.

■

One

One

and

Many

determine how Module selection operates. When

One

is pressed,

Module

Select

buttons are interlocked. Pressing a Module’s

Select

button selects that

module and deselects all others.

When used with

Copy To Master

and

Copy To Module

, pressing

One

allows only one

Input Module to be attached to the Master Section at a time.

Pressing

One

before a

Group A

, or

button causes only that group to be selected,

all other Modules are deselected.

■

Many

Pressing

Many

causes the Module

Select

buttons to operate in an additive mode.

Pressing a Module’s

Select

button selects the Module and adds it to any Modules

already selected. Pressing the

Select

button again deselects it from the selected

Modules.

When used with

Copy To Master

and

Copy To Module

, pressing

Many

allows multiple

Modules to be attached to the Master Section at the same time.

Pressing

Many

before

All

or a

Group A

, or

button causes the Group to be added

to any Modules already selected. Pressing the

Group

button again deselects that Group

from the selected Modules.

STATUS 18R

Operation and Maintenance Manual

Section 3 - Controls and Indicators

August 1999

3 - 14

One

Select Groups

Presets

All

Last

Many

None Selected

SoftKey

Toggle

Module

Undo

Set

Transparent

Swap Last

State

Auto

Select

Shift

Rec

Mix

Over

dub

Broad

cast

Copy To

Master

Copy To

Module

Selection Buttons

Содержание Status 18R


























































































































































































































































Результаты поиска

Содержание Status 18R

Отзывы:

OTARI Status 18R, Руководство по эксплуатации и обслуживанию, Страница: 52 / 250

Результаты поиска

Содержание Status 18R

Отзывы: