manualshive.com logo in svg

OTARI Status 18R, Руководство по эксплуатации и обслуживанию, Страница: 245 / 250

Поделиться
Скачать
OTARI Status 18R Скачать руководство пользователя страница 245

B.5 Operation

B.5.1 Gate Parameters

The following section describes the parameters available for noise gates:

• Threshold: 

Adjusts the level at which the noise gate opens (audio on). The level is

adjustable from -60 to +10 dB.

• Attack: 

Adjusts how quickly the noise gate opens when the Threshold level is

reached. The Attack time is adjustable from 50 µs (microseconds) to 5 seconds.

• Release: 

Adjusts how quickly the noise gate closes when the trigger level drops below

the Threshold level. The Release time is adjustable from 1ms (millisecond) to 5
seconds.

NOTE:

The Hold parameter can effect the release time by holding the noise gate open

for a length of time before the release time takes effect.

• Depth: 

Controls the amount of attenuation when the noise gate is closed (Off). Depth

is adjustable from -60 to 0 dB.

• Hold: 

Adjusts the amount of time that the noise gate will stay open before the Release

time takes effect after the trigger level drops below the Threshold level. The Hold time
is adjustable from 1 ms to 5 seconds.

• Masking: 

Adjusts the amount of time that must pass before a gate can be retriggered.

This is useful for minimizing false triggering when the gated sound has a predictable
waveform. The Masking time is adjustable from 1ms to 5 seconds.

• Key: 

The 

Key

button allows an alternate keying source to be selected for the noise

gate. Another module, an external analog bus or an external switch bus can be
selected. Turn the rotary encoder knob to cycle through all available options.

August 1999

B - 11

STATUS 18R

Operation and Maintenance Manual

Appendix B Dynamics Option

Parameter Select Button Functions

Threshold

Attack

Release

Depth

Hold

Mask

Ratio

Output

Auto Gain

Key

Preset

Link

Gate

Select

C/L

Threshold/Attack/Release (Gate and C/L)

Depth/Hold/Mask (Gate)

Ratio/Output/Auto Gain (C/L)

User Selected Parameters (Gate and C/L)

Preset/Key/Link (Gate and C/L)

Содержание Status 18R



























































































































































































































































Отзывы:

Нет отзывов