manualshive.com logo in svg

OTARI Status 18R, Руководство по эксплуатации и обслуживанию, Страница: 243 / 250

Поделиться
Скачать
OTARI Status 18R Скачать руководство пользователя страница 243

■ 

Parameter Section Controls

The parameter controls are used to select and adjust the gate and compressor/limiter
parameters. The LCD always displays the parameters currently being adjusted.
Adjustments are made by turning any of the three rotary encoder knobs in the parameter
section. Turning the knob clockwise increments the parameter value, turning it counter-
clockwise decrements it.

• Gate Button: 

Pressing 

Gate 

allows the gate parameters for the currently selected

path to be adjusted. When 

Gate 

is selected, the left-hand parameter select buttons

choose which parameters will be changed by the rotary encoders. The gate
parameters include: a) Threshold, b) Attack time, c) Release time, d) Depth of
attenuation, e) Hold time before release, f) Mask time before Gate can be retriggered,
g) Keying source, and h) Link to other paths.

• C/L Button: 

Pressing 

C/L 

allows the compressor/limiter parameters for the currently

selected path to be adjusted. When 

C/L 

is selected, the left-hand parameter select

buttons choose which parameters will be changed by the rotary encoders. The
compressor/limiter parameters include: a) Threshold, b) Attack time, c) Release time, d)
Compression ratio, e) Output level, f) Auto Gain On/Off (Auto adjust output level), g)
Keying source, and h) Link to other paths.

• Parameter Select Buttons: 

The four Parameter Select buttons to the left of the rotary

encoder knobs select which parameters are being adjusted for either the gate or
compressor/limiter. The parameters associated with each button are shown below:

Select Button: 

The 

Select 

button allows the engineer to control any combination of

three parameters for the gate and compressor/limiter. With this feature, for example,
the compressor/limiter threshold, release, and ratio parameters can be displayed and
adjusted at the same time.
To select parameters, hold the 

Select 

button down and turn a rotary encoder knob.

The display will sequence through all available parameters for the selected device so
that a custom parameter display can be created. From then on, whenever the 

Select

button is pressed, those parameters will be displayed for adjustment. Individual custom
displays can be created for gate and compressor/limiter.

NOTE:

If the same parameter is selected for two knobs, the display will show

“

CHANGE DUPLICATE ITEMS

”, indicating an error condition. Hold down the 

Select

button and change one of the duplicate items to remove the error.

• Rotary Encoder Knobs: 

The three rotary encoder knobs are used to adjust the three

parameters displayed on the LCD up or down. Turning the knob clockwise increases
the value, turning it counterclockwise decreases the value. When rotated at a normal
rate, the displayed value increases or decreases one increment per click of the knob.
When rotated quickly, the rate of change is increased so that the upper and lower
limits of the parameter can be reached with fewer turns of the knob.

• Threshold LED: 

The red LED above the 

Threshold 

label lights whenever the gain of

the path is being affected by either the gate or the compressor/limiter. If a device is
bypassed, it will not light the 

Threshold 

LED.

August 1999

B - 9

STATUS 18R

Operation and Maintenance Manual

Appendix B Dynamics Option

Threshold

Attack

Release

Depth

Hold

Mask

Ratio

Output

Auto Gain

Key

Preset

Link

Gate

Select

C/L

Dynamics Controller

Parameter Controls and LCD

Содержание Status 18R



























































































































































































































































Отзывы:

Нет отзывов