OTARI Status 18R Скачать руководство пользователя страница 54

Страница: 54 / 250

3.2.10 Soft Key

The SoftKey buttons include:
• SoftKey
• Toggle

The Master Section Softkey buttons work in conjunction with the SOFT button on the
Input Modules.

■

SoftKey

The

SoftKey

can be programmed to execute any function on the Master Section. A

programmed function can then be executed on individual Input Modules by pressing the
module’s

Soft

button.

Once programmed, Pressing

SoftKey

executes the programmed function on all selected

Input Modules. If no modules are selected, the programmed function is executed on the
Master Section only.

■

Toggle

Pressing

Toggle

while programming the

SoftKey

defines the

Softkey

as a toggle

function. When programmed as a toggle, the function switches to its alternate state each
time

SoftKey

is pressed.

When

Toggle

is not selected, an absolute switch state is programmed into the SoftKey.

Every time the

SoftKey

is pressed the same state is executed.

Certain functions cannot be programmed as a Toggle. These include Track Assign
Source and the Track Assign Matrix.

■

Programming a SoftKey

Press

Copy To Master

Copy To Module

to clear module selections.

Press

Clear Master

twice to clear all functions.

Press

Toggle

if the

SoftKey

should have a toggle function.

Press the desired function’s switch, if the softkey is not a toggle, select the
switch state desired.

Multiple functions can be selected.

Hold

Copy To Module

and press

Softkey

STATUS 18R

Operation and Maintenance Manual

Section 3 - Controls and Indicators

August 1999

3 - 16

SoftKey

Toggle

Soft Key

Содержание Status 18R


























































































































































































































































Результаты поиска

Содержание Status 18R

Отзывы:

OTARI Status 18R, Руководство по эксплуатации и обслуживанию, Страница: 54 / 250

Результаты поиска

Содержание Status 18R

Отзывы: