4.15 Image Recall
4.15.1 Overview
The Image Recall feature provides:
• Automated storage of current settings of all input module knobs, buttons and switch
states (track assigns, console routing, etc.)
• Automated resetting of all computer-controlled switches and other console functions
• Computer-assisted Image Recall of all non computer-controlled input module knobs,
buttons and routing switches.
Console settings are saved to the console’s internal 3-1/2" floppy disk. These settings
include position and state information of all computer-monitored knobs, switches, and
other functions. Console settings may be automatically named, or named by the
operator through the LCD display.
Status Recall provides automatic recall of computer-controlled items. However, since a
number of console functions are not under direct computer control, Image Recall
provides “computer assisted” recall of these functions.
Image Recall uses a combination of menu prompts and LED indicators to guide the user
through correcting (“nulling” ) all knobs, faders and switch settings.
■
Image Recall Keys
Console images are stored and recalled using the
RECALL
Menu of the LCD Menu
System. Press the
Recall
button below the LCD display to access this menu
■
Storing Console Images
Up to 15 Console Images may be stored. Images can be stored at any time except while
time code is running. To Store a console Image:
1.
Press
Recall
. Press the button under
IMAGE SAVE
.
2.
Press the Up or Down Arrow key to scroll to the Image number desired.
The
Image name displays
(EMPTY IMAGE FILE)
if there is no image saved under the
Image number.
3.
Press
NAME
to enter or change the Image name if desired.
The Name display is
described later in this section.
4.
Press
SAVE
to save the console image to disk.
If an image already exists for that
Image number, the LCD display will prompt “
Image File Exists,
Overwrite? Yes / No
”.
■
Recalling Console Images
To Load a Console Image:
1.
Press
Recall
. Press the button under
IMAGE LOAD
.
2.
Press the Up or Down Arrow key to scroll to the Image number desired.
The
Image name displays
(EMPTY)
if there is no image saved under the Image number.
3.
Press
LOAD
to load the image into the console.
The module switches change
immediately upon loading the image, and the console switches to the “Null Display”
mode. The following sections describe how to view and null the console pots and
switches.
■
Naming Console Images
The Name display is used to enter or change Image names. This display can be
accessed by pressing the
NAME
button in the Image Save menu. To Enter or Edit a
Snapshot Name:
1.
Press
Recall
. Press the button under
IMAGE SAVE
.
2.
Press the Up or Down Arrow key to scroll to the Image number desired.
The
Image name displays (EMPTY) if there is no image saved under the Snapshot
number.
4 - 30
STATUS 18R
Operation and Maintenance Manual
Section 4 - Operation
August 1999
Meter
Solo
Group
Recall
Automation
Misc
-SNAPSHOT- ---IMAGE---
LOAD SAVE LOAD SAVE
Recall Menu Display
Meter
Solo
Group
Recall
Automation
Misc
IMAGE NAME ü
NAME SAVE [15] ï
Image Save Display
Meter
Solo
Group
Recall
Automation
Misc
IMAGE NAME ü
LOAD [15] ï
Image Load Display