4.7.5 Copying One or a Few Switches from One Module to
Another
The following example demonstrates how a Track Assignment can be copied from one
module to another. Prepare a module for copying as follows:
1.
Select module 24.
2.
Assign the module to buses 1 through 8 by pressing
1-2
,
3-4
and
5-6
in the
Track Assign area of the Master Section.
All other Track Assign switches should be Off.
3.
Select module 23 and press
Clear
in the Track Assign area of the Master
Section.
No Track Assign switches should be lit.
To copy the Track Assignment from module 24 to module 23:
1.
Select module 24.
Track Assign switches
1-2
,
3-4
and
5-6
should be lit.
2.
Press
Set Transparent
twice.
All Master Section LEDs should be flashing.
3.
Press the Track Assign
Clear
button.
The Track Assign will stop flashing and Switches
1-2
,
3-4
and
5-6
will be lit. All
other functions will remain transparent.
4.
Press
Copy To Module
and select module 23.
Only the Track Assign setting will be copied.
NOTE:
The Track Assign switches are a special case when the
Set Transparent
button
is active. Each Track Assign button can be made individually transparent or the whole
track assign can be made transparent by pressing the
Clear
button.
4.8 Select Groups
One of the most powerful features of the STATUS 18R is the ability to define master
switch settings and execute them on all or a few modules. Select Groups provide a way
to select groups of modules with one button push. You may already have experience
with the
All
button, a Select Group button that selects all modules.
4.8.1 Select Group Buttons
The six Select Group Buttons are adjacent to the
Copy To Module
button in the Master
Section of the Digital Master module. The Select Group Buttons are:
• Group A, B, C
• All
• Last Select Group
• Shift
Group A
,
B
and
C
are user-defined buttons. Holding
Shift
while pressing
Group A
,
B
or
C
provides 3 more Select Groups for a total of 6. The
All
button is permanently defined
to select all modules. The
Last Select Group
button recalls the last module selection in
effect on the console.
4.8.2 Defining a Select Group
The
Group A
,
B
and
C
buttons are defined as follows:
4 - 14
STATUS 18R
Operation and Maintenance Manual
Section 4 - Operation
August 1999
One
Select Groups
Presets
A
B
C
All
Last
Many
F1
None Selected
F2
F3
SoftKey
Toggle
Module
Undo
Set
Transparent
Swap Last
State
Auto
Select
Shift
Rec
Mix
Over
dub
Broad
cast
Copy To
Master
Copy To
Module
Edit and Selection Buttons