OnRobot VGC10 Скачать руководство пользователя страница 135 | Manualshive

Страница: 135 / 213

OnRobot VGC10 Скачать руководство пользователя страница 135

Additional Software Options

135

Paths menu

NOTE:

The Path feature may not be available to your robot type.

This page can be used to import, export, and delete the previously recorded paths. In this way a Path can
be copied to a different Compute Box.

To import a previously exported Path (.ofp file) click on

Import

and browse for the file.

The available Paths are listed at the end of the page. Any paths can be exported and downloaded as a .ofp
file or permanently deleted to free up the list if a path is not needed anymore.

NOTE:

Always make sure that you do not delete any path that is currently in use
in any of your robot programs. Otherwise the path will need to be re-
recorded, since the delete operation cannot be undone.

The Compute Box can store up to 100 Mbytes of paths that is roughly equal to 1000 hours of recordings.

«
...
133
134
135
136
137
...
»

Содержание VGC10






















































































































































































































Отзывы:

Нет отзывов