Omron ZG -, Руководство пользователя

Страница: 162 / 210

Basic Knowledge for Operation
160
ZG User’s Manual
Guidelines for Selecting Sensitivity Adjustment and Measurement Triggers
The ZG series is provided with two measurement modes, “input of an external trigger to
start measurement” and “continuous measurement without the need for input of a trigger.”
Note, however, that the combinations of sensitivity and measurement trigger are
restricted. Select which combination to use to suit your specific application.
To measure a shape at high precision
Use the combination “MULTI sensi
trigger input enabled.”
With MULTI sensitivity, the measurement
target must be made stationary as time is
required to adjust the sensitivity for each
individual line.
To perform continuous measurement
To perform measurement continuously or
when the measurement target cannot be
made stationary, use the combination
“AUTO sensi trigger disabled
(continuous measurement).”
To judge shapes at high speed
Use the combination “FIXED sensi
trigger enabled.” This combination has a
short response time. Measurement can be
performed with triggers input at short
intervals.
Trigger measurement
Continuous measurement
To measure by a trigger at short intervals
Trigger
Trigger
Trigger