Omron ZG -, Руководство пользователя

Страница: 114 / 210

Communication Using I/O Signals
112
ZG User’s Manual
Assignments and Functions of I/O Signal Wires
Assignment of output signal wires
Assignment of input signal wires
Function Signal Description
Judgment
output ALL-PASS Turns ON when the judgment result of all tasks is OK (or all tasks
are not registered).
NG Turns ON when there is even one task whose judgment result is NG.
ERROR Turns ON when there is even one task for which a measurement
error occurred.
Trigger
auxiliary ENABLE Turns ON when trigger input is enabled during trigger measurement.
Turns OFF during bank switching.
GATE Turns ON when the measurement result is being fixed.
(The startup and output times can also be set.)
Function Signal Description
Bank
switching BANK A/
BANK B This is used for switching banks. Specify the bank No. in
combinations of A and B.
Bank Nos. that can be switched by input signal wires are banks 1 to
4. If banks 5 to 16 must be switched, switch by using serial
communication commands or by operating the keys on the
Controller.
ENABLE output becomes OFF during bank switching. (when a
trigger is enabled)
Bank switching time p.124
Stop laser LD-OFF Stops laser lighting (emission). While LD-OFF is being input, linear
output and judgment output conform to the non-measurement setting.
Regular During trigger measurement
ON
ON
Trigger
Continuous
OFF
-
Ban k switching in progress
OFF
OFF
Selected ban k BANK A BANK B
OFF
OFF
ON
ON
Ban k 1
Ban k 2
Ban k 3
Ban k 4
OFF
ON
OFF
ON