manualshive.com logo in svg

Omron V430-F-series, Руководство пользователя, Страница: 14 / 404

Поделиться
Скачать
Omron V430-F-series Скачать руководство пользователя страница 14

12

  Precautions for Safe Use

Auto Focus Multi Code Reader V430-series User’s Manual (Z392)

Precautions for Safe Use

• Please do not use this product to directly or indirectly use to detect the human body for the purpose 

of ensuring the safety. In the same application, please use the safety sensor that is published on our 
sensor catalog.

• Omron products are designed and manufactured as general-purpose products for use in general 

industrial applications. They are not intended to be used in the following critical applications. If you 
are using Omron products in the following applications, Omron shall not provide any warranty for 
such Omron products, unless otherwise specifically agreed or unless the specific applications are 
intended by Omron.

(a) Applications with stringent safety requirements, including but not limited to nuclear power control 

equipment, combustion equipment, aerospace equipment, railway equipment, elevator/lift equip-
ment, amusement park equipment, medical equipment, safety devices and other applications that 
could cause danger/harm to people’s body and life

(b) Applications that require high reliability, including but not limited to supply systems for gas, water 

and electricity, etc., 24 hour continuous operating systems, financial settlement systems and other 
applications that handle rights and property

(c) Applications under severe condition or in severe environment, including but not limited to outdoor 

equipment, equipment exposed to chemical contamination, equipment exposed to electromagnetic 
interference and equipment exposed to vibration and shocks

(d) Applications under conditions and environment not described in specifications

*1. In addition to the applications listed from (a) to (d) above, Omron products (see definition) are not intended for 

use in vehicles designed human transport (including two wheel vehicles). Please do NOT use Omron prod-
ucts for vehicles designed human transport. Please contact the Omron sales staff for information on our auto-
motive line of products.

*2. The above is part of the Terms and Conditions Agreement. Please use carefully read the contents of the guar-

antee and disclaimers described in our latest version of the catalog, data sheets and manuals.

• Do not use the product in areas where flammable or explosive gases are present.
• Be careful when unpacking this product, please. Injury may occur if the reader falls and strikes a per-

son.

• Do not install the product close to high-voltage devices and power devices in order to secure the 

safety of operation and maintenance.

• Make sure to tighten all installation screws securely.

Condition of the fitness of OMRON products

Installation Environment

Содержание V430-F-series





















































































































































































































































































































































































































Отзывы:

Нет отзывов