![background image](http://html1.mh-extra.com/html/omron/sysmac-c500-nc113/sysmac-c500-nc113_operation-manual_742437134.webp)
9-1
Section
(
#
When transferring the data, there is no need to be concerned with the order of
the addresses. The Position Control Unit will check the addresses and store the
data in its internal RAM by address.
Any order is okay.
Position Control Unit
Address
1000
Address: 1000
Address: 1005
1005
The Intelligent I/O Write instruction is used to transfer the created data to the
Position Control Unit.
Note
1. The number of words for the created data that is to be transferred must
match the number of words specified by the Intelligent I/O Write instruction.
If they do not match, the data cannot be properly transferred (e.g., if some
other data is included or if there is not enough data for the number of desig-
nated words, the data may either be treated as an error and not written or
may be written as an error data).
2. Since the NC113 is not provided with the Y axis, do not transfer data to the
data area address for the Y axis (refer to
5-2 Data Handled By the Position
Control Unit
). If data is transferred to this address, a format error (8309) will
occur.
In this example, 30 words of data beginning with DM 1000 are transferred to the
Position Control Unit allocated I/O words 0 and 1.
When the Posi-
tion Control
Unit is allocated
words 0 and 1
If there are more than 127
words to be transferred,
divide the transfer into
two segments.
Address m
Address n
to
Address l
DM1000
1001
1002
1003
1004
1005
1006
1007
1026
1027
1028
1029
Position Control Unit
Address
m
n
to
l
30
words
WRIT
5002
5002
Data transfer
DIFU
5000
WRIT
#0030
DM1000
00
5000
5001
(=)
25506
5003
5004
5004
WRIT
5002
5003
(=)
25506
5001
Transferring Data
Program Example
Содержание SYSMAC C500-NC113
