![background image](http://html1.mh-extra.com/html/omron/sysmac-c500-nc113/sysmac-c500-nc113_operation-manual_742437214.webp)
10-7
Section
&
10-6 Changing the Override During Operation
Speed
800 pps
Target speed: 2,000 pps
Positioning
action #10
Speed #02
Override: 16 (unit: x0.1)
2,000 x 16 x 0.1 =
3,200 pps
When override is left at 1.0
Time
Override
CHANGE OVERRIDE
16 x 0.1
Deceleration
Acceleration
There are two ways to use the override.
•
Apply the override to all operations from start to finish by turning ON the over-
ride enable/disable (bit 07 of command word m+1) and executing START.
•
Apply the override to operations following execution of the CHANGE OVER-
RIDE command. Set the override in advance and then make the change by
turning ON the CHANGE OVERRIDE bit (bit 12 of command word m+2). This
second method, changing the override during positioning, is the way that is il-
lustrated in this example.
Settings
Parameter Editing Screen
Initial position: #10
Initial speed: #01
Positioning Action Editing Screen
Position
Speed
Acceleration/
deceleration
Completion
code
Speed Editing Screen
No. 01: 800
N0. 02: 2,000
No. 10:
02
Set the OVERRIDE bit (bit 00 to 07 of word m+4) to “16” (BCD). Turn the
CHANGE OVERRIDE bit (bit 12 of word m+2) from OFF to ON.
10-7 Resetting the Present Position
When CHANGE PRESENT POSITION (bit 08 of word m+1) is turned ON (i.e., at
the leading edge), the position where operation is currently stopped becomes
the parameter’s present position change setting (example: 0 pulse).
Present position change setting: 0
Turn the CHANGE PRESENT POSITION command bit (bit 08 of word m+1)
from OFF to ON.
Command
Setting
Command
Содержание SYSMAC C500-NC113
