![background image](http://html1.mh-extra.com/html/omron/sysdrive-3g3fv/sysdrive-3g3fv_user-manual_743234156.webp)
5-34
Settings
Setting
Name
Function
0
RUN at Frequency Ref
Operate according to the frequency reference. (E1-09 is invalid.)
1
STOP
Interrupt the output. (Coast when the frequency reference is below E1-09.)
2
RUN at Min Frequency
Operate at E1-09 frequency. (Output the frequency set in E1-09.)
3
RUN at Zero RPM
Zero-speed operation
(Zero reference value when the frequency reference is below E1-09.)
Parameter E1-09 sets the minimum output frequency. Set this minimum level to satisfy the require-
ments of the application.
Parameter
Display name
Setting
Units
Default
Valid access levels
number
p y
g
range
setting
V/f
Control
V/f with
PG
Open Loop
Vector
Flux
Vector
E1-09
Min Frequency
0.0 to 400.0 ---
0.0
Quick-start, Basic, or Advanced
Advanced
H
Initial Excitation Function Settings (b2-01, b2-03, and b2-04)
With flux vector control, the DC braking (injection) function is replaced by the initial excitation function.
The initial excitation function stops a motor that is rotating because of inertia. These parameters cannot
be changed during operation.
Parameter
Name
Setting
Units
Default
Valid access levels
number
(not displayed)
g
range
setting
V/f
Control
V/f with
PG
Open Loop
Vector
Flux
Vector
b2-01
Excitation level
0.0 to 10.0
Hz
0.0
Basic or Advanced
b2-03
Initial excitation
time when starting
0.00 to 10.00
s
0.00
Basic or Advanced
b2-04
Initial excitation
time when stopping
0.00 to 10.00
s
0.50
Basic or Advanced
Basic Operation
Chapter 5
Содержание SYSDRIVE 3G3FV
