Omron SYSDRIVE 3G3FV, Руководство пользователя, Страница: 317 / 400

7-29
Para
meter
No.
Control mode Changes
during
opera-
tion
Default
setting
Setting
range
Description Name Para
meter
No.
Flux vec-
tor
Open
loop
vector
V/f with
PG
V/f
control
Changes
during
opera-
tion
Default
setting
Setting
range
Description
Display
name
E5-03 Motor 2
no-load
current Sets the motor constants of
motor 2, when used for
two-motor switching
Note 1: Enabled when the mo- 0.00 to
2.90
(see
note 5) 1.20
(see
note 3) NO A A A A
No-Load
Current
Note 1: Enabled when the mo-
tor 2 selection function
is set for multi-function
input.
note 5)
E5-04 Motor 2
number of
motor poles
Note 2: Set like E1-04 to E2-06.
Note 3: Changes motors after
Inverter and motor stop.
2 to 48 4 NO A A A A
Number of
Poles
Note 4: Waits to change motor
for 20 to 50 ms after
Inverter input.
E5-05
Motor 2
phase-to-
phase re-
sistance
Note 5: Cannot use motor 1
parameters and motor 2
parameters at same
time.
Note 6: Motor selection signal
0.000
to
65.000 9.842
(see
note 3) NO A A A A
Term
Resistance
Note 6: Motor selection signal
will be enabled when
the motor 2 selected
function is set for multi-
E5-06
Motor 2
leakage
inductance
function is set for multi
function output.
Note 7: If the control method for
motor 1 is different from
that for motor 2, all oth-
0.0 to
40.0 18.2
(see
note 3) NO A A A A
Leak
Inductance
that for motor 2, all oth-
er parameters of motor
2 will be set to default
settings.
Note 1. These voltages are for the 200-V class; Double the voltage for 400-V class Inverters.
Note 2. The default values are restored if the control mode is changed. The defaults for open-loop
control are shown.
Note 3. The default setting depends on the Inverter’s capacity. The default settings shown in the table
are for 200-V class, 0.4 to 1.5 kW Inverters.
Note 4. The setting range is 10% to 200% of the Inverter’s rated output current. (The default settings
shown in the table are for 200-V class, 0.4-kW Inverters.)
Note 5. The setting range is between 0.00 and 0.1 less than the motor’s rated current. (The default
settings shown in the table are for 200-V class, 0.4-kW Inverters.)
7-2-5 Options Parameter Lists
H
PG Option Setup: F1
Para
meter
Name
Description Setting
range
Default
setting
Chan-
ges
Control mode
Page
meter
No.
Display
name
range setting ges
during
opera-
tion
V/f
control
V/f
with
PG
Open
loop
vector
Flux
vector
F1-01 Number of
PG pulses Sets the number of PG (pulse
generator or encoder) pulses. 0 to
60000 1000 NO X Q X Q 5-29,
5-46
PG
Pulses/Rev
g )
Note: Sets the number of pulses
per motor revolution.
Parameter Lists
Chapter 7