![background image](http://html1.mh-extra.com/html/omron/sysdrive-3g3fv/sysdrive-3g3fv_user-manual_743234133.webp)
5-11
Run Source Settings
Setting
Name
Run source
0
Operator
Digital Operator
1
Terminals
Control circuit terminals (external terminals)
2
Serial Com
Not used. (Do not set.)
3
Option PCB
Optional Card (CompoBus/D Communications Card or SYSMAC BUS I/F
Card)
4
EWS
Not used. (Do not set.)
H
Setting Control Input Responsiveness (b1-06)
Parameter b1-06 is used to set the responsiveness of the control inputs (forward/reverse and multi-
function inputs); it cannot be changed during operation.
Parameter
Display name
Setting
Units
Default
Valid access levels
number
p y
g
range
setting
V/f
Control
V/f with
PG
Open Loop
Vector
Flux
Vector
b1-06
Cntl Input Scans
0 or 1
---
1
Advanced
Settings
Setting
Name
Function
0
2mS – 2 Scans
Two scans every 2 ms (Use when connecting transistor outputs.)
1
5mS – 2 Scans
Two scans every 5 ms (Use when connecting contact outputs or switches.)
Note Set the responsiveness to match the type of control inputs being used. Use a setting of “1” if there
is even one contact input.
5-1-5 Acceleration/Deceleration Time Settings
H
Acceleration/Deceleration Time Units (C1-10)
Parameter C1-10 is used to set the units for the acceleration and deceleration time settings in C1-01
through C1-08. Setting C1-10 to “0” allows the acceleration and deceleration times to be set very pre-
cisely, but reduces the maximum time setting from 6000.0 s to 600.00 s.
This parameter cannot be changed during operation.
Parameter
Display name
Setting
Units
Default
Valid access levels
number
p y
g
range
setting
V/f
Control
V/f with
PG
Open Loop
Vector
Flux
Vector
C1-10
Acc/Dec Units
0 or 1
---
1
Advanced
Settings
Setting
Name
Function
0
0.01 Seconds
Sets the acceleration/deceleration time units to 0.01 seconds.
1
0.1 Seconds
Sets the acceleration/deceleration time units to 0.1 seconds.
H
Acceleration/Deceleration Time Settings (C1-01 through C1-08)
Parameters C1-01 through C1-08 set the acceleration and deceleration times individually.
Basic Operation
Chapter 5
Содержание SYSDRIVE 3G3FV
