![background image](http://html1.mh-extra.com/html/omron/sysdrive-3g3fv/sysdrive-3g3fv_user-manual_743234139.webp)
5-17
D
Setting “3” to “6”: Multi-step References 1 through 3 and Jog Reference
Eight frequency references and one jog reference can be used in the 3G3FV. Set “Multi-step Reference
1, 2, and 3” and “Jog Frequency Reference” in multi-function inputs, and change the status of these
inputs to switch between these 9 frequency references.
Setting
Function
3
Multi-step Reference 1 (Also used for main-speed/auxiliary-speed switching when “Auxiliary
Reference” is set in multi-function analog input H3-05.)
4
Multi-step Reference 2
5
Multi-step Reference 3
6
Jog frequency reference (This setting has higher priority than the multi-step references.)
The following table shows which frequency is selected by each possible combination of multi-step and
jog reference settings.
Multi-step Reference
Jog
R f
Selected frequency
1
2
3
g
Reference
q
y
OFF
OFF
OFF
OFF
Reference 1: d1-01 (main-speed frequency, see note 1)
ON
OFF
OFF
OFF
Reference 2: d1-02 (auxiliary-speed frequency, see note 2)
OFF
ON
OFF
OFF
Reference 3: d1-03
ON
ON
OFF
OFF
Reference 4: d1-04
OFF
OFF
ON
OFF
Reference 5: d1-05
ON
OFF
ON
OFF
Reference 6: d1-06
OFF
ON
ON
OFF
Reference 7: d1-07
ON
ON
ON
OFF
Reference 8: d1-08
---
---
---
ON
Jog reference: d1-09
Note 1. Reference 1 is selected when b1-01 is set to “0” (Operator) and the analog input (terminal 13
or 14) is selected when b1-01 is set to “1” (Terminals).
Note 2. The analog input from terminal 16 is selected when H3-05 is set to “0” (Auxiliary Reference)
and reference 2 is selected for any other H3-05 setting.
Basic Operation
Chapter 5
Содержание SYSDRIVE 3G3FV
