Omron NT - SUPPORT TOOL 07-1995, Руководство по эксплуатации

Страница: 85 / 225

66
Common Setting Operations
Section 4-2
4-2-3 Specifying the Display Color (NT30C, NT610C Only)
When using the NT30C or NT610C, both the color used to display characters and
graphics and the color used for the background can be specified. Depending on
the screen elements created, the following colors can be specified.
Characters/Numeric Values
S
Display color: Specifies the color of characters and numeric values.
S
Background color: Specifies the color of the background to characters
and numeric values. If
(transparent color) is
specified, the background becomes transparent and
elements underneath it can be seen through it.
Background color
Character color
A
Graphics
S
Basic color: In the case of graphics drawings this is the color of
lines and in the case of tiled figures it is the color of the
tiling.
S
Background color: Specifies the color that will be the background after a
graphic has been tiled (the color that can be seen in
the gaps in a pattern). If transparent color is
specified, the elements underneath can be seen
through the background.
S
Boundary color: Specifies the color that indicates the boundaries of
tiled areas.
Pattern background color
Green (Basic color)
Graphic Tiling
Boundary line color
Pattern display color (Basic color)
Lamps/Touch Switches
S
Frame color: This specifies the color of the frame if “Frame” is set for
frame
display.
S
Ptot color: This specifies the color of a lamp or touch switch when it is
OFF. If transparent color is specified, the elements
underneath can be seen through the OFF color.
S
Lit color: This specifies the color of a lamp or touch switch when it is
ON.