Omron NT - SUPPORT TOOL 07-1995, Руководство по эксплуатации

Страница: 44 / 225

25
“Tool Settings” Screen
Section 3-3
[Time] [F3] PT time setting . . .
Used to make the time setting for the PT. The time function can be used with the
NT30, NT30C, NT612G, NT610C, NT620S, NT620C.
(1) Connect the PT and the support tool (see Section 7 Data Communication).
(2) Press the [F3] (Time) key.
(3) To change the current time, enter the time on the screen.
(4) Set the PT to the “Transmit Mode”.
(5) Press the key: the time data will be sent and set in the PT.
"
It is also possible to receive the time set in the PT and set it. Press the [F1]
(receive) key with the time setting screen displayed.
[Edit] [F4] Tool settings for the “Edit” screen (environmental settings) . . .
Used to set the “Edit” screen settings, such as grid display and “snap ON” setting.
These settings can also be made by selecting SET ENV on the initial editing
screen. For the details of these settings see “Environmental Settings” (p.59).
Quitting tool setting
S
Press key twice: the support tool will be set in accordance with the details
displayed on the screen and the display will return to the main menu.
S
Press the [Esc] key to return to the main menu without making any settings.