Omron NT - SUPPORT TOOL 07-1995, Руководство по эксплуатации

Страница: 57 / 225

38
“Scr list” Screen
Section 3-5
(*4) When direct connection is used and reading of a numeral memory table,
character-string memory table, or bit memory table is specified, confirma-
tion of whether or not the direct connection information is read is displayed.
(*5)
S
Image data is selected from codes FE20 through FEFF.
S
Library data is selected from FA20 through FAFF, FB20 through FBFF,
FC20 through FCFF, FD20 through FDFF.
S
Use [Shift] + [ ] or [Shift] + [ ] to move the bar cursor to the previous or
next code for which there is data.
S
The bar cursor can be moved to a specified code by pressing the [Tab] key
and inputting the code.
It is possible to continue reading more data from the same file.
To quit data reading, press the [Esc] key; the display will return to the “Screen
Selection” screen.
[Commnt] [F6] Change comment . . .
Used to change the comments assigned to screen data.
(1) Locate the bar cursor at the screen number whose comment is to be changed
and press the [F6] (Commnt) key.
(2) Input the new comment and press the key.
It is possible to change the comments for a number of screen numbers in a
batch by marking the screen numbers. However, this only applies to screen
numbers for which data already exists.
[Image & Lib] [F7] Edit Image/library data . . .
Used to create and modify image library items.
Editing of images and library data is only possible with the NT30, NT30C,
NT612G, and NT610C.
See Section 5 “Creating a Mark Image Library”.
[Co/Ovl] [F8] Continuous screen & overlapping screen setting . . .
Used to specify continuous screens and overlapping screens.
(1) Locate the bar cursor at a screen number for which there is no data and press
the [F8] (Co/Ovl) key.
"
If a number for which there is data is specified, a message asking whether or
not the data is to be cleared is displayed.
(2) Select either “Cont Scr” or “Ovlp Scr” and press the key.
The set screen will become the parent screen.
(3) Set the child screens by following the help messages.
"
Up to 8 child screens can be set in the case of both continuous screens and
overlapping screens.
"
Only one numeral setting screen can be set as a child screen.