Omron NT - SUPPORT TOOL 07-1995, Руководство по эксплуатации

Страница: 114 / 225

95
Creating Fixed Displays
Section 4-3
Deleting Tiling
Procedure 1. Select “TILING” from the fixed display menu and then press the [F1] (Delete)
key.
A
j
mark will be displayed at the point at which the tiling was specified.
2. Locate the cursor at the
j
mark of the tiling to be deleted and press the
key.
3. Check the message and then press the key; the tiling will be deleted.
To abort deletion, press the [Esc] key.
Modifying Tilings
Procedure 1. Select “TILING” from the fixed display menu, then press the [F2] (Modify) key.
A
j
mark will be displayed at the point where the tiling was specified.
"
It is also possible to proceed straight to step 3. by left clicking on the tiling to be
modified (see p.57).
2. Locate the cursor at the
j
mark of the tiling to be modified and press the
key.
3. Select the required item and execute the modification.
S
Detail: Select to change the tiling pattern.
S
Color: If using an NT30C or NT610C, select to change the color.
S
Display position: Select to change the tiling location.
4. Press the [Esc] key to quit modification.