Omron NT - SUPPORT TOOL 07-1995, Руководство по эксплуатации

Страница: 42 / 225

23
“Tool Settings” Screen
Section 3-3
S
Printer: Specify the type of the printer used to print screen
data, etc., here.
S
Sheet Feeder: Specify whether or not the printer is fitted with a
sheet feeder here.
S
Mouse Use: Specify whether or not a mouse is used with the sup-
port tool, and, if a mouse is used, the operation when
the mouse is used.
If “Auto movement” is selected, the mouse cursor
moves automatically when a window or other screen
display for making setting is displayed, speeding up
input and specification operations.
If “No
AutoMvmnt” is selected, the mouse cursor does not
move automatically. However, the mouse cursor is
displayed, and can be used, during image data
editing, even if “Not used” is set.
S
Communication Port: Specify the port on the computer to be used to com-
municate with the PT. If possible, do not specify the
same port as the one used for the mouse.
S
Communication Mode: Set the communication speed for communication of
data with the PT.
Set “Stndrd” if the conditions for communication are
unfavorable due to interference, etc.
S
Work Directory: The support tool temporarily creates work files for
data creation and communication, etc. This setting
specifies the directory in which work files can be
created.
S
Data Directory: Specify the directory in which created screen data
files are saved here.
Reference:
S
The NT series support tool is compatible with all OMRON PT models, all
versions of the direct connection function (Ver.3, Ver.4, Ver.5), and the
communication methods other than direct connection. The support tool displays
and selectable functions differ according to the settings made for “PT Type”,
“Direct Access”, and “Direct Macn Type”.
S
For details on the direct connection function, refer to the user’s manual for the
relevant host interface unit.
S
The specified “PT Type”, “Memory Size”, “Direct Access”, and “Direct Macn
Type”, are displayed on each screen as shown below.