Omron NT - SUPPORT TOOL 07-1995, Руководство по эксплуатации

Страница: 13 / 225

xii
Usable Hardware Combinations
The combinations of hardware that can be used, and the settings to be made with
the support tool, are shown in the table below. Within each box of the table, the
upper entry indicates the model of the interface unit (latter part of the model des-
ignation only) and the lower entry in parentheses indicates the model of the sys-
tem ROM (latter part of the model designation only).
This table shows the basic combinations. Depending on the PT display method
and system configuration, they may not be usable.
PT Model
Communication
Support Tool “Direct Access” Setting
PT Model
Communication
Method
None Ver.4 Ver.5
NT20S
Host − ST121 (-V1) (*1) ST121 (-V1) (*2)
NT − ST121 (-V1) (*1) ST121 (-V1) (*2)
RS ST128 (*2) − −
C200H − ST121 (-V1) (*1) ST121 (-V1) (*2)
NT20M/
NT2000M
Host LK201
(SMR01-E)
LK201
(SMR31-E)
−
RS LK201/LK202
(SMR01-E)
− −
C200H LB121
(SMR02-E)
LB122
(SMR32-E)
−
SYSBUS RT121
(SMR01-E)
− −
NT600S Host − ST121 (-V1)/ST211 (-V1)
(*2)
ST121 (-V1)/ST211 (-V1)
(*2)
NT − ST121 (-V1)/ST211 (-V1)
(*2)
ST121 (-V1)/ST211 (-V1)
(*2)
RS ST121/ST211 (*2) − −
C200H − LB122 LB122
NT600M Host LK201 (*3)
(SMR01-EV1)
LK201
(SMR31)
−
RS LK201/LK202
(SMR01-EV1)
− −
C200H LB121
(SMR02-EV1)
LB122
(SMR32)
−
SYSBUS RT121
(SMR01-EV1)
− −