Omron NT - SUPPORT TOOL 07-1995, Руководство по эксплуатации

Страница: 120 / 225

101
Setting Lamps
Section 4-6
4. Make the necessary settings.
S
LampNo. /Bit: If direct connection is not used, set the lamp number here. If
direct connection is used, set the bit (lamp bit) allocated at the
PC.
S
Label: Set the characters (Label) that will be displayed together with
the lamp. If this setting is omitted, nothing will be displayed
together with the lamp.
S
Pressing the [F3] (Mark) key allows marks to be input.
S
With the NT30, NT30C, NT612G, and NT610C, pressing
[F4] (Image) allows images to be input.
S
Details
S
Frame: Specify whether or not a frame is to be displayed around the
lamp graphic here.
S
Attribute: Specify whether the lamp will come on continuously or flash
when there is an instruction for it to light from the PC here.
S
Shape: Specify the graphic used to create the lamp here.
Four types of graphic can be used: square, circle, polygon, or
fan.
When using an NT20S, NT20M, NT600S, or NT600M, only
squares and circles can be used.
S
Color: Frame color, OFF color, ON color, and flashing color for the
lamp (NT30C and NT610C only).
S
Label Det: Display settings for the Label characters.
Display attributes and smoothing cannot be specified with the
NT20S, NT20M, NT600S, or NT600M. It is not possible to
specify a scale of x64 when using an NT20S or NT20M.
S
Label Col: Specifies the character color and background color of the La-
bel (NT30C, NT610C only).
5. Press the key with the cursor on “Exec”.
6. Create the lamp graphic.
For details on the creation method, see 4-3 “Creating Fixed Displayes” (p.80).