Omron NT - SUPPORT TOOL 07-1995, Руководство по эксплуатации

Страница: 139 / 225

120
Creating Graphs
Section 4-8
5. Press the key with the cursor on “Exec”.
6. Locate the cursor at the start point of the bar graph frame and press the
key. The bar graph will be created as a rectangular graphic. Graphics oriented
either vertically or horizontally can be created.
7. A box that indicates the size of the percentage display will be displayed.
Move this box to the required display position and press the key.
If “No” is set for “Display %”, this box is not displayed.
8. The specified percentage display and bar graph will be displayed.
9. The screen on which registration fields for bar graphs can be selected will be
displayed.
To create another bar graph, select a field.
To quit bar graph creation, press the [Esc] key.
Setting Trend Graphs (NT30, NT30C, NT612G, or NT610C with Ver.3 or later only)
One trend graph frame can be created per screen, and up to 50 broken lines can
be set within this frame.
Procedure 1. Select “GRAPH” from the initial editing screen.
The graph menu will be displayed.
2.
Select “TREND GRAPH” from the graph menu.
"
If there is already a trend graph, the screen for selecting the field for registration
is displayed. Selecting an empty field allows you to proceed to step 7.
3. Locate the cursor at the start point for the trend graph frame and press the
key.
Trend graphs are created as rectangular graphics. They can be oriented ei-
ther vertically or horizontally.
4. Locate the cursor at the end point of the trend graph frame and press the
key.