Omron NT - SUPPORT TOOL 07-1995, Руководство по эксплуатации

Страница: 107 / 225

88
Creating Fixed Displays
Section 4-3
4-3-5 Creating Polygons
This is the procedure for drawing polygons. It is possible to create polygons with
up to 255 sides.
It cannot be used with the NT20S, NT20M, NT600S, or NT600M.
Procedure 1. Select “FIX DSP” from the initial editing menu.
The fixed display menu will be displayed.
2. Select “POLYGON” from the fixed display menu.
3. Select the display attribute with “Detail”.
The selectable options are “normal”, “inverted”, “flashing” and “spot”.
4. If using an NT30C or NT610C, specify the line color.
5. Press the key with the cursor on “Exec”
6. Draw the polygon.
1) Press the key at the start point.
2) Locate the cursor at a the next vertex and press the key.
Set as many vertices as required.
3) At the final vertex, press the key while holding down the [Shift] key (or
double click if using the mouse).
The final vertex will be joined to the start point automatically.
End point
Automatically joined
Start point
Vertices
(Shift+ )
( )
( )
"
Pressing the [Esc] key before the end point has been set deletes the last drawn
straight line.
"
Pressing the [Esc] key while holding down the [Shift] key aborts the drawing.
7. Press the [Esc] key to quit polygon drawing.