Omron NT - SUPPORT TOOL 07-1995, Руководство по эксплуатации

Страница: 181 / 225

162
Marks
Section 5-1
S
Moving the screen
Pressing one of the arrow keys while holding down the [Alt] key will move the mark
displayed on the screen.
Creating screen Alt + Alt +
Alt +
Alt +
Functions of the Function Keys
[Cha Ref] [F1] Character reference . . .
Used to display an input character in the reference area.
(1) Press the [F1] (Cha Ref) key.
(2) Input the character to be used for reference (one wide font character or a max-
imum of two normal font characters).
(3) Press the key: the character will be displayed.
[Mk Ref] [F2] Mark reference . . .
Used to display an existing mark in the reference area.
(1) Press the [F2] (Mk Ref) key.
(2) Locate the cursor on the mark in the mark list window that is to be displayed.
(3) Press the key: the character will be displayed.
[Copy] [F3] Area copy . . .
Used to copy the dots in a specified area into the creating area.
(1) Press the [F3] (Copy) key.
(2) Specify the start point and end point of the area to be copied.
(3) Move the area to the copy destination and press the key: the dots will be
copied.
[RCopy] [F4] Copy from the reference area . . .
Used to copy the dots in a specified area of the reference area to the creating area.
(1) Press the [F4] (RCopy) key.
(2) Specify the start point and end point of the area within the reference area that
is to be copied. Specify diagonally opposite points to specify a rectangular
area.
(3) Move the area to the copy destination within the creating area and press the
key: the dots will be copied.