Omron FZ3 Series, Руководство пользователя

Страница: 187 / 304

6
M
eth
od
s
fo
rC
on
ne
ctin
g
an
d
C
om
m
un
ica
tin
g
w
ith
E
xte
rn
al
D
ev
ice
s
FZ3 User's Manual Controlling/Outputting through Parallel Communication 185
GATE
Used to control the loading time of measurement results to external devices.
ON for the time required for external devices to securely load measurement results.
Set the output cycle so that the total output time is shorter than measurement interval (input interval
of STEP signal).
The GATE signal is only output when the [Parallel Judgement Output] and [Parallel Data Output]
are set in the measurement flow.
READY
ON when it is possible to input STEP signal. When through images are being viewed, the READY
signal will turn to OFF, but the STEP signal is received.
Input signal
Signal Function
STEP
Inputs measurement triggers from external devices such as optic switches, etc. Perform
measurement once along with the STEP signal turning on (OFF
→
ON). Turn the STEP signal ON
for at least 0.5 ms.
A noise filter (filter default setting value: 100 μs) is set in STEP input.
Note
●
The following can be changed with regard to the READY signal.
●
Handling of ERROR signal when STEP signal is input during measurement
Reference: Setting Conditions Related to Operation during Measurement (p.108)
Important
●
During parallel continuous measurement and when the STEP signal is input continuously, do not perform
switching of the scene group. When this is performed, set "Unchecked" in "Save scene group on switch scene"
in either of the settings items below.
●
Switch Scene Group window Reference: Switching Scene Groups (p.50)
●
[Measure setting] in the [Measure] menu Reference: Setting Conditions Related to Operation during Measurement (p.108)
Continuous measurement
Important
●
Measurement is given priority when continuous measurement is being performed. As a result, the measurement
results (overall judgment, image, judgment for each processing unit in the flow display, detailed results) may not
be updated.
When continuous measurement ends, the measurement results of the final measurement are displayed.
Acesst 1.0 6251194